Agricultural Research Management Information System

Home
Research Summary
Search
About Us
- ARMIS
- Brochure
Contact Us
Report
User Request
Data Input
Help
- Operation Manual
  - PDF
  - Video
- Program Area & Commodity
We have reached 37600 number of research entries at this moment.

- Logout

Research Detail

Home
Research
Detail

Effect of Different Form of Raw Jute Feeding System in Breaker Card on Medium Count (8lbs/spy).

M.A. Quashem
Principal Scientific Officer
Mechanical Processing Division, BJRI

A.K.M. Mahabubuzzaman
SSO
Mechanical Processing Division, BJRI

Dr. Md. Osman Ghani Miazi, PSO
Chief Scientific Officer
Mechanical Processing Division, BJRI

Md. Kamal Uddin,
Director (Technology)
Director (Technology, BJRI

Abstract/ Executive Summary:

The project was initiated in 2004. Several experiments were carried out in this project. More quality yarn can be produced through spreader machine.

Keywords: Breaker card, Count, Spreader machine, Emulsion, Finisher card

Location: Mechanical Processing Division, BJRI

Start Date:

End Date:

Program Area: Postharvest and Agro-processing

Commodity: Jute

Objectives:

To make uniform jute yarn and cost reduction of the traditional jute products.

Methodology:

Two different experiments were done in this experiment. Experiments were carried out from raw jute fibre to yarn through two processes, one is 25% emulsion applied on fiber in Softener machine. This normal emulsion supplied from OD batch mixture machine. The name of the other processing stages are i) Softener ii) Breaker Card iii) Finisher Card iv) Ist drawing v) 2nd drawing vi) 3rd Drawing and vii) Spinning Frame. Another process is to be followed with spreader machine applying 25% emulsion to fiber. This emulsion will be supplied from OD batch mixture machine. The name of the other stages are i) Spreader machine ii) Breaker Card iii) Finisher Card iv) First drawing machine v) 2nd drawing vi) 3rd Drawing and vii) Spinning Frame.

Source of Information: Annual Technical Report: 2005-2006, 2006-2007 Page: 77-78

Article Link (Online Journal):

Funding Source:

1. Government

Budget: 1,00,000/-(One lac taka)

Total Budget (Tk.) : 1,00,000/-(One lac taka)

Achievement/Findings:

It is shown from the experiment that the quality ratio of “A” is 88.52% and that of “B” is 96.71%. The CV% of experiment “A” is higher than that of experiment “B”. But CV% of count is almost same. The mean tensile strength of experiment “B” is higher than that of experiment “A”. So, finally it may be concluded that the ‘B’ feeding system is better than that of other feeding system for producing yarn.

Knowledge Management: Journal, Report/Proceedings